GigaTest Custom Test Fixtures

GigaTest Custom Test Fixtures

For popular high speed components like semiconductor packages, and test contactors, we have developed a custom test fixture which allows the use of high bandwidth microprobes to measure virtually any I/O pin, according to GigaTest's methodology and requirements.

These fixtures are typically 2-layer, or multi-layer precision PCBs, with mounting pads for attaching the DUT. For BGA packages, the sample is soldered to the board. For pogo-pin contractors and test sockets, the sample is screwed down, with alignment holes ensuring a proper contact to the fixture. Probing is then accomplished from the "back" side of the test board, where via pads are surrounded by ground plane. This probe launch is designed to accommodate the use of 450u pitch Ground/Signal probes, and provides a very good signal launch for TDR and VNA measurements. The fixtures also have via measurement coupons for de-embedding the effects of the PCB from the measurement.

gigatest labs custom test fixture

Available Test Fixtures

  • Probes

  • Single Probes
  • Deep Access Probes
  • Dual Probes
  • Set2Dil Probes
  • Probe Calibration Substrates
  • Probe Stations

  • GTL 4040
  • GTL 4060
  • GTL 5050
  • GTL 9500
  • Probe Station Accessories

© 2004-2016 GigaTest Labs. All rights reserved